ESCO 10200 Combi Bead Breaker Kit with ½ Gallon Pump

ESCO Combi Bead Breaker Kit with ½ Gallon Hydraulic Air Pump
SKU 10200

The ESCO Combi Bead Breaker Kit #10200 includes:

#10101 – “Combi” Bead Breaker Tool
#10518 – ½ Gallon Hydraulic Air Pump
#10604 – 8′ Hose Assembly with Hose Coupler
#10601K – Air Pressure Reducer with 6″ Whip-Hose

The ESCO #10101 Combi Bead Breaker Tool features a Redesigned Sequence Valve and Lock Jaw Pin Set Screw. The ESCO #10518 ½ Gallon Hydraulic Air Pump is specifically designed for automotive, light truck, and heavy-duty applications. The ESCO #10604 8′ Hose Assembly with Hose Coupler won’t kink, is reinforced with 2 layers of braided steel, and can withstand extreme cold temperatures. The ESCO #10601K Air Pressure Reducer with 6″ Whip-Hose is designed to regulate the air pressure that is received by the hydraulic pump, which is then used to power all ESCO Hydraulic Tools.

The ESCO Professional Bead Breaker Series have become a staple in the tire service industry for well over 30 years. ESCO provides a wide range of bead breakers that can handle rim sizes from the smallest to the largest of application.

ESCO #10101 Combi Bead Breaker Tool New Design

REDESIGNED SEQUENCE VALVE – Adjustable and Longer Lasting…

The “Sequence Valve Screw” has been redesigned to better aid in both usability and eliminating potential issues while the product is in use on the Wheel Assembly (1).

PROBLEM: The Old Design Nut (2) would get damaged during the use of the tool. This damage would then make it difficult to service the bead breaker and/or adjust the sequencing of the bead breaker, eventually putting the bead breaker “out of service”.

In addition to damaging the sequence screw over time, the spring inside of the bead breaker loses strength and clamping force weakens, resulting in the need to replace the spring or “shim” the spring with a washer, which is NOT reccommended. This may also result in leaking of the valve body.

SOLUTION: ESCO has redesigned the Sequence Valve Screw to a recessed adjustable set screw (1) that not only keeps the screw completely out of the way during the use of the tool but, also makes it a much more convenient solution for “adjusting” the sequence of the bead breaker while out in the field*.

*NOTE: It is possible to OVER TORQUE the Set Screw. This will result in damaging the tool or even the wheel assembly. Mark where you started with the set screw and adjust in “quarter turns” ONLY.

LOCK JAW PIN “SET SCREW” – More Control & Better Bites

ESCO has redesigned the “JAW” to create a much stronger and stabilized gripping of tool onto wheel assembly (3).

PROBLEM: The jaw of the bead breaker, due to its design, has some “give” allowing for it to move from side to side. This then will cause the bead breaker to grab onto the wheel assembly at an angle, causing potential scarring of the internal rams that operate the bead breaker.

SOLUTION: ESCO has added an additional “set screw” (3) that clamps the jaw onto the pin centrically so that there is no movement on the jaw. This in turn will keep the bead breaker aligned straight, aiding in removing a potential for damage to the unit, giving a more precise grasp onto the wheel assembly. 

The ESCO #10518 Pro Series ½ Gallon Hydraulic Air Pump is specifically designed for automotive, light truck, and heavy-duty applications. This pump is constructed with the user in mind, as a compact lightweight air hydraulic pump solution that delivers a powerful punch; requiring only 80 PSI for 10,000 PSI of operating hydraulic pressure to power even the heaviest of cylinders, ram, bead breakers, and more. Built-in exhaust muffler promotes safer, quieter operation along with a robust foot pedal providing hand-free pumping and release of load. Manufactured with the highest quality parts and components designed to withstand rigorous use in any environment. All ESCO air hydraulic pumps are designed with fully serviceable pump motors, allowing for economical repairs and maintenance. The aluminum reservoir is lightweight and durable for field, shop, and mobile applications. 

The ESCO #10604 8′ Hose Assembly with Hose Coupler is a hydraulic hose with swivel fitting, hose won’t kink. Reinforced with 2 layers of braided steel. All hoses can withstand extreme cold temperatures of -40°F (C). Use with any 10,000 psi. pump, ram, or bead breaker. Includes #10605 Half Coupler. 

The ESCO #10601K Air Pressure Reducer with 6″ Whip-Hose, for Air/Hydraulic Pumps, is designed to regulate the air pressure that is received by the hydraulic pump, which is then used to power all ESCO Hydraulic Tools. Maintaining air pressure when using Hydraulic Equipment will increase the Proper Functioning of Hydraulic Equipment, Protect Air/Hydraulic Pumps from Over-Flow of Air, & Keep ESCO Hydraulic Products in their PRIME.